Epson PowerLite 720c Quick Setup Manual

Also see for 730c - PowerLite Projector: Installation manual User guide Technical brief User guide User manual

Contents

quick setup

1 Connect the power cord to your projector and plugthe other end into an electrical outlet.2 Remove the lens cover.3 Press the red Power button. The power lightflashes green, and then stays on.4 Turn on or restart your laptop. (Windows® only: If yousee this Add New Hardware screen, click Cancel.)STARTHERETurn overTurn on your equipmentConnect the projectorto your laptopPower cord Computer cableFollow these instructions to connect the projectorto your laptop. To connect other devices, such asa VCR or desktop PC, see your User’s Guide.EPSON®PowerLite®720c/730cQuick SetupLens coverCaution: Before unpluggingthe projector...To shut the projector down properly:1. Press the red Power button twice.Let the projector cool while thepower light flashes orange(about 45 seconds).2. Once the light stops flashing andstays on, it’s safe to unplugthe projector.Never unplug the projector whenthe power light is green orflashing orange.For most setups, you’ll need just these two cables:Power light1 Make sure your projector and laptop are turned off.2 Connect one end of the computer cable to theComputer/Component Video port on the projector.3 Connect the other end to your laptop’s video or monitor port.If you can’t connect the cable to your PowerBook,® you may needto use an adapter. See your User’s Guide for instructions.

/ 2

Related manuals for Epson 730c - PowerLite Projector