Quick SetupBefore using the projector, make sure you read the safety instructions in theonline User’s Guide.Connect the projectorBefore you can connect to the projector, you need to remove the screws andthe cable cover.ComputerChoose from the following connections. See the sections below or the onlineUser’s Guide for details.VGA cableUSB cableHDMI cableUSB portConnect the square end of a USB cable to the projector’s USB-B (square) port.Connect the flat end of the cable to any USB port on your computer.Windows® 2000 SP4 or later: After turning on the projector, followthe on-screen instructions to install the Epson® USB Display software(EMP_UDSE.EXE; only on first connection). If the software screen does notdisplay automatically, open My Computer or Computer, then double-clickEPSON_PJ_UD.OS X 10.5.8 or higher: After turning on the projector, the setup folder forUSB Display appears in the Finder. Double-click USB Display Installer andfollow the on-screen instructions to install the Epson USB Display software(only on first connection).Computer portConnect one end of a VGA cable to the projector’s Computer1 or Computer2port, and the other end to your computer’s monitor port. If you are usinga laptop, switch it to external display (see “Troubleshooting”). You can alsoconnect an audio cable.HDMI portConnect one end of an HDMI cable to one of the projector’s HDMI ports andthe other end to an HDMI port on your computer.External monitor and speakersYou can connect an external monitor and external speakers to your projectorto enhance your presentations. See the online User’s Guide for details.Wired networkConnect the projector to your network using an Ethernet cable. See “Project overa wired network” for more information.Note: To connect to a wireless network, you must install the optional EpsonWireless LAN Module (ELPAP07). To purchase the Epson Wireless LAN Moduleor other accessories, see “Optional accessories”. For more information, see theonline User’s Guide.MicrophoneConnect a dynamic microphone to the Mic port, using a 3.5 mm mini-jack cable.Video deviceConnect up to 6 video devices and use the Source Search button on theprojector or remote control to switch between them. For more information onplaying sound through the projector, see the online User’s Guide.S-VideocableComponent videoto VGA cableAudio cableRCA video cable(composite video) HDMI cableMobile media deviceConnect tablets, smartphones, and other devices that support the MHL™standard to the HDMI 1/MHL port.MHL cableDevices that support an MHL connection include the Samsung™ Galaxy Note II™and the Roku® Streaming Stick™. Some devices may require an adapter or maynot require an MHL cable. Not all features or functions may be supported. Checkyour device’s documentation for more information.CamConndocuUMakFor mTu1234PowerLite® 570/575W/580/585W