Epson PowerLite 1815p Quick Setup Manual

Also see for 1815p - PowerLite XGA LCD Projector: User guide User manual Operation guide Operation guide Function guide

Contents

2 Turn the focus ring to sharpen the image.Turn the zoom ring to reduce or enlarge the image.3 If your image looks like , , , or , press the Quick Setupbutton on the projector and follow the on-screen instructions.PowerLite®1815pQuick Setup1 Turn On Your Equipment1 Connect the power cord to the back of the projector and plug the otherend into an electrical outlet.2 Open the A/V Mute slide (lens cover). Make sure the slide is openedcompletely.3 Remove the battery cover on the remote control. Locate the two AAAbatteries that came with the projector and insert them. Then replacethe battery cover.4 To turn the projector on, press the Power button on the projectoror the remote control. The projector beeps once, and the projector’sPower light flashes green and then stays on.To shut down the projector:1. Press the Power button twice.2. When the orange light stops flashing and the projector beeps,you can unplug the projector.How do you want to get images to the projector?• To connect to a notebook, see “If connectingto a notebook” below.• To project over a wireless network, see“If projecting wirelessly” on the back of this sheet.You must have installed the projector’s EasyMP™ software andconfigured your projector and computer before you can projectwirelessly. See your User’s Guide for instructions.• To give a presentation stored on a CompactFlash memory card,flash drive, digital camera, or other USB storage device, seeChapter 5 in your User’s Guide.• To connect to your notebook using the included USB cable,see your User’s Guide.If connecting to a notebook...1 Turn on the projector and adjust the image as described insections 1 and 2.2 Locate the computer cable that came with the projector.Connect one end to the projector’s blue Computer1 port.Connect the other end to your notebook’s video-out port ormonitor port.3 Press the Source Search button on the projector or theSearch button on the remote control until your computerimage is displayed.NOTE: If your notebook has a DVI connector, you need to use anoptional DVI-to-VGA adapter with the included computer cable(see your computer’s documentation).3 Choose aPresentation Method1 To raise the image, press the foot release button for the frontadjustable foot and lift the front. Release the button to lock thefoot in position.2 Adjust the ImageTurn overComputer cableZoomFocusPower buttonBefore using the projector, make sure you read the safetyinstructions in the User´s Guide on your projector CD.Power light

/ 2

Related manuals for Epson 1815p - PowerLite XGA LCD Projector