Epson PowerLite 1715c Installation Handbook

Also see for 1715C - PowerLite XGA LCD Projector: Installation manual User guide Parts list User manual Operation guide

Contents

INSTALLATION HANDBOOKRemote Control InformationEpson PowerLite 1715c1Using the Remote ControlFollow these tips for using the remote control:Point the remote control at the front of the projector or at thescreen.Stand within 20 feet of the projector.Avoid using the remote under bright fluorescent lamps or indirect sunlight, or the projector may not respond properly.Replacing the BatteriesReplace the batteries as described below:1. Turn the remote control over.2. Press down on the tab on thebattery cover as you lift the coveroff.3. Install two AAA batteries,inserting the + and – ends asshown.4. Position the cover as shown, thenpress down until it snaps intoplace.noteIf a button is pressed longerthan 30 seconds, the remotecontrol stops operating toconserve power. When yourelease the button, normaloperation resumes.cautionWhen replacing batteries,take the followingprecautions:Replace the batteries assoon as they run out. If thebatteries leak, wipe awaybattery fluid with a softcloth. If fluid gets on yourhands, wash immediately.Do not expose batteries toheat or flame.Dispose of used batteriesaccording to localregulations.Remove the batteries ifyou won’t be using theprojector for a long period oftime.