Displaying and Adjusting the Image 25Correcting Computer ImagesIf you’re connected to a computer and the image doesn’t look right,press the Auto button on the remote control or the Enter button onthe projector. This automatically resets the projector’s tracking, sync,resolution, and position settings.If the Auto button doesn’t correct the problem, you may need toadjust the tracking or sync using the projector’s Signal menu. Seepage 119 for more information.Using the A/V Mute SlideYou can use the A/V Mute slide to temporarily turn off the image andsound when you want to redirect your audience’s attention.Shutting Down the ProjectorWhen you’ve finished using the projector, follow the recommendedprocedure to shut it down. This extends the life of the lamp andprotects the projector from possible overheating.1. Turn off any equipment plugged into the projector.2. To turn off the projector, press the red PPower button on theremote control or projector.noteYou must be projecting animage for this button to haveany effect. The Auto buttonworks only with computerimages projected through theVGA port.noteLamp life results will varydepending on mode selected,environmental conditions,and usage.Turn off this product whennot in use to prolong the lifeof the projector.Downloaded From projector-manual.com Epson Manuals
