Epson PowerLite 1221 Quick Setup Manual

Also see for PowerLite 1221: User guide Supplement Declaration of conformity

Contents

Quick SetupBefore using the projector, make sure you read the safety instructions in theonline User’s Guide.Connect the projectorChoose from the following connections. See the sections below or the onlineUser's Guide for details.ComputerUSB PortConnect the square end of a USB cable to the projector’s USB TypeB(square) port. Connect the flat end of the cable to any USB port on yourcomputer.Windows® 2000 SP4 or later: After turning on the projector, follow theon-screen instructions to install the Epson USB Display software(EMP_UDSE.EXE; only on first connection). If the software screen does notdisplay automatically, open My Computer or Computer, then double-clickEPSON_PJ_UD.Mac OS® X 10.5.1 or higher: After turning on the projector, the setup folderfor USB Display appears in the Finder. Double-click USB Display Installer andfollow the on-screen instructions to install the Epson USB Display software(only on first connection).Note: If you have problems installing the USB Display software, make sure theUSB Type B setting in the projector’s Extended menu is set to USB Display.See the online User’s Guide for instructions.Monitor PortConnect one end of a VGA cable to the projector’s Computer port, and theother end to your computer’s monitor port. If you are using a laptop,switch it to external display (see “Troubleshooting”). You can also connect anaudio cable.HDMI PortConnect one end of an HDMI cable to the projector’s HDMI port and the otherend to an HDMI port on your computer.Video DeviceConnect up to 4 video devices and use the remote control to switchbetween them.RCA video cable (composite video)Component video to VGA cableS-Video cableAudio cableHDMI cableCamera, USB Device, or Epson Document Camera DC-06Connect a digital camera, USB flash drive, USB storage device, or Epsondocument camera DC-06 to the projector’s USB TypeA (flat) port.If you connect a digital camera, USB flash drive, or USB storage device, you canuse the projector’s Slideshow feature. See the online User’s Guide for details.Turn on your equipment1 Turn on your computer or video source.2 Plug in the projector.The power light on theprojector turns orange.3 Open the A/V Muteslide all the way.4 Press the power button onthe projector or remote control. Theprojector beeps, the power light flashesgreen, and then stays on.Note: To shut down the projector,press the power button twice, thenunplug it. You don’t have to wait for theprojector to cool down.5 The default language of the menu system is English. To select anotherlanguage, press the Menu button on the remote control. SelectExtended and press Enter. Select Language and press Enter. Selectyour language and press Enter. Press the Menu button to exit the menusystem.Adjust the image1 If you don’t see an image, press the Source Search button on theprojector or remote control to select the image source.Note: If you still see a blank screen or have other display problems, see thetroubleshooting tips on the right.PowerLite®1221/1261W*412139400**412139400*USB cableHDMI cableVGA cable

/ 4

Related manuals for Epson PowerLite 1221