Epson Perfection 1260 Photo Quick Start Manual

Also see for 1260 - Perfection Scanner: Brochure & specs Product support bulletin Product support bulletin Manual Product support bulletin

Contents

install the software

EPSON Perfection® 1260 and 1260 PhotoStartHereStartHere1 Make sure you have everything:EPSON Perfection 1260 PHOTO only:NOTE: See your on-screen Scanner Reference Guide forinstructions on scanning slides and negatives.2 Remove all the packing tape, but leave the yellow stickerin place for now.IMPORTANT!Leave the yellow sticker inplace until you’re instructedto remove it.Unpack Your ScannerWait! You must install your software before connecting thescanner to your computer. The install process may take upto 15 minutes.Be sure to close all open programs and turn off any virusprotection programs.Windows ®1 Insert the scanner software CD-ROM in the CD-ROM or DVD drive.The installer starts automatically.If it doesn’t start, open My Computer, double-click EPSON,then double-click EPSON.2 When you see a message asking you to disable antivirus software,click Continue.3 Read the license agreement, then click Agree.4 At the Software Installation screen, click Install.5 Follow the on-screen instructions to install each program. After eachone is installed, click Next or Finish to continue. Note that EPSONSmart Panel™ installs in several steps. If you have PDA software onyour computer, Presto! PixExpress will be installed.Please wait until the process is complete.6 When you see this message, click Yes or No:You see this screen:NOTE: Presto! PixExpress will not be installed if you don’thave PDA software on your computer. If you add it later,you can install Presto! PixExpress. See your on-screenScanner Reference Guide for instructions.7 Click Exit. The EPSON Product Registration screen appears.8 Register your scanner as instructed. At the last screen, click Done orclose your browser. Then follow the instructions in section 3 to connectthe scanner.Install the Software Macintosh®1 Insert the scanner software CD-ROM in the CD-ROM or DVD drive.(If necessary, double-click the EPSON CD-ROM icon to open it.)2 Double-click .3 When you see a message asking you to disable antivirus software, click OK.4 Read the license agreement, then click Agree.5 When the Software Installation screen appears, click Install.You see the EPSON TWAIN 5 Installer:6 Click Install.When the EPSON TWAIN installation is complete, click Restart.Don’t remove your CD-ROM. After your Macintosh restarts,you can install the rest of your software.7 When your Macintosh restarts, double-click the EPSON CD-ROM iconto open it, if necessary, then double-click . You see this screen:8 Click Install and follow the on-screen instructions to install eachprogram. After each one is installed, click Quit to continue.Note that EPSON Smart Panel installs in several steps. If you havePDA software on your computer, Presto! PixExpress will be installed.9 When you see this message, click Yes or No:You see this screen:NOTE: Presto! PixExpress will not be installed if you don’thave PDA software on your computer. If you add it later,you can install Presto! PixExpress. See your on-screenScanner Reference Guide for instructions.10 Click Exit. The EPSON Product Registration screen appears.11 Register your scanner as instructed. At the last screen, click Done orclose your browser. Then follow the instructions in section 3 toconnect the scanner.12 Connect the Scanner3AC adapterScannerCD-ROM with EPSON®TWAIN driver, software,and electronic manualsUSB cableFilm holder Slide holderFilm adapterPower cordAfter your software is installed, it’s time to get connected!1 Remove the yellow sticker from the back of the scanner.2 Slide the transportationlock all the way tothe right.3 Connect the powercord and AC adapter,as shown.4 Connect theAC adapterto the scanner.5 Plug the other end of the powercord into an electrical outlet.The scanner turns on and beginsto warm up. The Start buttonon the front of the scanner turns green.6 Plug the square endof the USB cable into thescanner’s USB port.7 Plug the flat end of thecable into any available USB porton your computer.NOTE: Your system may not workcorrectly if you use a USB cableother than the one supplied byEPSON or if you connect to yourcomputer through more thanone hub.Now you’re ready to start scanning!Turn this sheet over for step-by-step instructions.Remove theyellow stickerAC adapterClick InstallClick ExitClick InstallClick InstallClick ExitClick InstallStart buttonAC adapterPower cordTurn OverTransportationlock

/ 2

Related manuals for Epson 1260 - Perfection Scanner