Menu
Epson OT-WH30 Installation Manual
Also see for OT-WH30: Installation manualInstallation manual
  |
Wall Hanging Bracket SetOT-WH30 Installation Manual© Seiko Epson Corporation 2015. All rights reserved.Printed in China□ Wall-mount □ Bracket □ Screws for bracket(3 × 8) (2 pieces)□ Installation Manual 84 mm(3.31 inches)26 mm(1.02 inches)26 mm(1.02 inches)□ Spacers (2 pieces)The OT-WH30 is an optional hanging bracket for attaching the TM-m30 printer to a wall.This manual describes the procedures and precautions for installing and using the OT-WH30.PrecautionsThe OT-WH30 can be used only with the TM-m30 printer. Using on other product may result in improper installation andoperation.UnpackingMake sure that you have all the items shown, and that none has been damaged. If you find anything missing or damaged, contactyour dealer.Note:❏ Screws for wall-mount are not included. Please use screws appropriate to the type of wall being used.❏ Depending on the conditions during storage and shipping, some rust may form around the edges of the wall-mount orbracket. This may be removed with sandpaper.Attach the bracket to the holes on the bottomcover using the screws (3 × 8).Peel off the stickers from the spacers, and attachthem to the printer in the positions shown below.CAUTION:Make sure that the surface of the printer is cleanand dry.Slide the bracket into the slots of the wall-mount.CAUTION:When mounting the printer, make sure that thewall-mount is securely fastened to the wall.InstallationTurn off the printer and detach all cables from theprinter.Attach the wall-mount to the wall.CAUTION:❏ To fix the printer securely, install the wall-mount on a wall made of wood, concrete, ormetal. The thickness of the wall should be 10mm or more.❏ In order to insure that the wall-mount canproperly support the weight of the printer,please secure it with screws appropriate tothe type of wall the wall-mount is installedon. A screw with 4 mm diameter and lengthof 12 mm or more is recommended.❏ Be sure to fasten the wall-mount securely tothe wall with a screw in each of the 6 holes.❏ Before attaching the wall-mount, make sureenough space remains around the printer.❏ Make sure that there is enough space foropening the roll paper cover. |
Related manuals for Epson OT-WH30
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved