Epson LABELWORKS PX LW-PX900 User Manual

Also see for LABELWORKS PX LW-PX900: User guide Firmware update manual

Contents

Read this document carefully to use this productsafely and correctly. If your product is faulty, pleaseread the included warranty card and contact thestore you purchased it from. If you require furtherassistance, contact your local K-Sun customersupport center.Please also visit us at www.K-Sun.com for help andsupport.Portions of this software are copyright 2015 TheFreeType Project (www.freetype.org). All rightsreserved.International ENERGY STAR® ComplianceStatementThe purpose of the International ENERGY STAR®Program is to promote the development andpopularization of energy-efficient office equipment.As an ENERGY STAR® Partner; Seiko EpsonCorporation has determined that this product meetsthe ENERGY STAR® guidelines for energy efficiency.The included items differ depending on the type of product package you purchased. Use the following table to check the items.If you would like to purchase an item that is not included or have purchased a package other than one in the following table, seethe separate sheet included with the product.No. Included item namePackage nameLW-PX900 Full kit LW-PX900 Lite kit LW-PX900 PC kit1 LW-PX9002 AC adapter3 Li-ion battery (C52CE97010) - -4 USB cable -5 Label Editor Professional CD-ROM -6 Magnetic attachment (C52CE98010) - -7 Documents ** You can download LW-PX900 Instruction Manual (PDF) from www.K-Sun.com.User’s GuideNotation used in this manualWARNINGIndicates information that, if ignored, couldpossibly result in serious personal injury or evendeath due to incorrect handling.CAUTIONIndicates information that, if ignored, couldpossibly result in personal injury, physicaldamage, or damage to equipment due toincorrect handling.Attention Indicates important information aboutLW-PX900.MEMO Indicates additional information and points whichmay be useful to know regarding a topic., , , Indicates a title and page with more detailedinformation.Shows an image of the label to be used as anexample., , Indicates the buttons on LW-PX900."Name"Indicates the menu items, messages shown onthe display, or the name of a manual. Example:"On", "Start print?"BodyDimensions Approx. 136 (W) x 295 (D) x 97 (H) (mm)Weight Approx. 1,250 g (excluding batteries, tape cartridge)Usage conditionsOperating temperature 5 to 35 degrees CStorage temperature -10 to 55 degrees CSupported tape width4 mm, 6 mm, 9 mm, 12 mm, 18 mm, 24 mm, 36 mmPower supplyBatteryLi-ion battery x 1 / AA alkaline battery x 6AC adapterType AST1527Z1-1Manufacturer Seiko Epson Corp.Input AC100-240V, 0.4A, 50-60Hz(dedicated adapter, power cable only)Output DC15V, 2.7ATotal output power 40.5 WSafety InstructionsFor your safety, read the attached documents carefully to use this productcorrectly. After you have read all instructions, keep this manual handy forfuture reference and to make your concerns clear.Items below indicate safety precautions to protect users, their surroundingsand their property from possible injury or damage.Precautionary notations are categorised as follows according to personalinjury and damage to the equipment if the instructions are ignored or theequipment is misused.DANGERThis symbol indicates information that, if ignored, could possiblyresult in serious or fatal personal injury. Take extra caution inperforming procedures with DANGER headings.WARNINGThis symbol indicates information that, if ignored, could possiblyresult in serious personal injury or even death due to incorrecthandling.CAUTIONThis symbol indicates information that, if ignored, could possiblyresult in personal injury, physical damage, or damage to equipmentdue to incorrect handling.The following describes the meaning of each symbol used in theprecautions.This indicates an important reminder.This indicates a prohibited item.This indicates a mandatory procedure.DANGERWhen handling batteriesIf any liquid from the battery gets into your eyes, promptly wash itout with clean water for more than 10 minutes and consult yourdoctor at once. If you do not, the liquied may cause loss of eyesight.Never disassemble or modify the battery pack. This may cause fire,explosion, leakage, overheating or damage.Do not expose the battery to fire or heat it. This may cause fire,explosion, leakage, overheating or damage.WARNINGWhen using the AC adapter and power cableDo not use any AC adapter or power cable other than the dedicatedAC adapter and power cable. Do not use the AC adapter with otherthan the specified voltage also. Otherwise, damage, overheating, fireor electric shock may occur.Take the following precautions when handling the AC adapter andpower cable.• Make sure to avoid octopus wiring.• Make sure the plug is not dusty before inserting it into an outlet.• Insert the plug firmly into the outlet.• Do not hold the AC adapter or the plug with wet hands.• Do not pull the power cable when disconnecting the plug. Be sureto hold the plug when disconnecting it.• Do not make any modification to the AC adapter or power cable.• Do not apply strong shocks to or put a heavy object on the ACadapter or power cable.• Do not bend or twist the AC adapter or power cable forcibly.• Do not place the AC adapter or power cable near a heater.Do not use any damaged AC adapter or power cable. Otherwise,damage, overheating or smoking may occur, which may result in fireor electric shock.Do not touch the plug during thunderstorms.When handling batteriesKeep the battery pack away from fire or flame if it produces a strangeodor or leakage. Otherwise fire or explosion may occur.Should any battery liquid get on skin or clothing, promptly wash itoff with clean water. If you do not, the liquid may damage your skin.Do not expose the battery to water. Do not allow water to contactthe terminals. This may cause fire, overheating, or electric shock.Keep batteries out of reach of children. They are extremelydangerous if swallowed. Contact a doctor immediately if swallowed.When using this productDo not apply any strong force or shocks to the product such asstanding on, dropping or hitting it. Otherwise, the product may bebroken, which may result in fire or electric shock. If it is damaged,turn off the power immediately, unplug the AC adapter and removethe batteries, and then contact the K-Sun customer support center.Continuous use may result in fire or electric shock.Take care not to spill any beverage such as tea, coffee or juice ontothe product, or to spray aerosol insecticide. It may cause malfunction,fire, or electric shock. If any liquid has been spilled on the product,turn off the power, unplug the AC adapter and remove the batteriesimmediately, and then contact the K-Sun customer support center.Continuous use may result in fire or electric shock.Do not touch the printhead because it becomes very hot. Otherwise,there is a risk of burns.Do not open any covers other than the top cover or battery cover.Doing so may result in fire or electric shock. Always use the productas instructed in this manual. Otherwise, damage or injury may occur.Never modify or disassemble this product. Doing so may cause fireor electric shock. Do not carry out any operations not described inthis manual, or the product may break or cause injury.If any of the following abnormalities is observed, turn off the powerimmediately, unplug the AC adapter and remove the batteries, andthen contact the K-Sun customer support center.• If smoke, strange odours or unexpected noises come from theproduct• If liquid or foreign objects get inside the product• If the product has been dropped or damagedDo not touch the tape eject slot, during printing or when the autocutter is in operation. Otherwise there is a risk of injury.OthersDo not use or store the product, batteries, AC adapter, power cable,or tape cartridges in the following places.• In direct sunlight.• Where it may become extremely hot such as in a vehicle with the windowsclosed.• Where it may become extremely hot such as near a heater or thetemperature becomes very unstable such as near the exhaust duct ofan air conditioner.• Where the product may get wet due to a shower or rain such as in abathroom or outdoors.• In a dusty place or where the product may be exposed to smoke orsteam such as near the kitchen or a humidifier.• On an unstable place such as on a shaky table or on an inclinedplace.• Where it might be subjected to vibration or shock.• Near high-voltage power lines or something that generates amagnetic field.Keep the plastic bags used to contain the product or this manual outof reach of children. Children may suffocate if they swallow them orput their heads into the bags.CAUTIONWhen handling batteriesIf liquid leaks from a battery, wipe it off with a cloth and replace itwith a new one. If the liquid comes in contact with your skin, wash itaway with water immediately.If the batteries are used incorrectly, they may cause leakage,overheating, explosion, erosion, or damage to the product, which mayresult in fire or injury.• Do not use new ones and old batteries together, or mix different types ofbatteries.• Use AA alkaline batteries.• Use batteries in the correct directions.• Take the batteries out immediately when they have no powerremaining.• Take the batteries out if you do not use the product for a long time.• Do not heat batteries or throw them in fire or water.• Do not pinch the batteries with metal tweezers or use any pointedsharp metal object such as the tip of a mechanical pen or ball-pointpen when taking the batteries out.When disposing of used batteries, make sure to follow theregulations.When using the AC adapterDo not unplug the AC adapter while the product is in operation,otherwise printing may not be successful.Do not use the AC adapter in a small, confined space, or cover it witha cloth. Otherwise, the AC adapter may overheat and deteriorate.When using this productDo not stand or put anything heavy on the product or place it on anunstable place such as on a shaky table or on an incline. Otherwise,the product may fall and cause injury.To ensure safety, unplug this product before leaving it unused.Before cleaning, make sure to unplug the AC adapter from the outlet,and remove the batteries.Do not use a moistened cloth or solvents such as alcohol, thinner orbenzine.Do not block or insert objects into the supplied AC adapter socket orthe tape eject slot. When handling tape cartridges• Make sure to use a dedicated PX Tape.• Some types of tape cannot be cut by the cutter. For the details, refer to the tape'smanual.• Do not drop it or disassemble it. Doing so may cause damage.• Do not pull out the tape forcibly by hand. But make sure to feed the tapewith . Otherwise, the tape cartridge may be broken and unusable.• Avoid using a tape cartridge without remaining tape. Doing so maycause overheating of the printhead, which may result in damage ormalfunction.MEMOTape cartridges contain ink ribbons in them. When disposing of tapecartridges, make sure to follow the local regulations for disposal. Other cautionsNotes on usage• Do not touch the thermal head. Static electricity may damage thethermal head.• Do not plug in and unplug the AC adapter while printing. Power may becut off.• The Li-ion battery cannot be charged while printing.• Operate the keyboard gently.• Take care not to cut your fingers when cutting the label with scissors.• Do not attach a label on human bodies, living things, public facilities orother people’s belongings.• Be sure to turn the power off after use.• Powering off message is displayed while turning off the product. Do notremove the AC adapter until the message disappears.• Be sure to replace batteries with the power turned off. If you replace thebatteries while the product is powered, files or data stored on it may bedeleted. Recycling the BatteryContains a lithium-ion battery. Must be recycled or disposed of properly.MEMODo not disassemble the battery pack.For American UsersThe lithium-ion battery is recyclable. At the end ofits useful life, under various state and and locallaws, it is illegal to dispose of this battery into yourmunicipal waste stream. Please call1-800-8-BATTERY for information on how to recyclethis battery. MessagesThis section explains the remedies when the following messagesappear on the display.Check batteryCharge Li-ion!The battery run out of power. Connect the ACadapter to LW-PX900 and charge the battery.For details, "Charging the Li-ion battery"Check batteryChange alkalineThe batteries run out. Turn off the power andreplace all batteries with new ones.Cover open! Top cover is open. Close the top cover.Insert tape Check if the tape cartridge is loaded or correctlyset.For details, "Installing a tape cartridge"Check tapecartridgeThe loaded tape is not supported. Insert a correctcartridge.No moresequence No.!Only up to 2 sequence numbers can be inserted.No more barcode! Only up to 2 barcodes can be inserted.QR CODE too big! Perform either of the following:Use a wider tape. Reduce the text or cell size.Lower "ECC Level".Overheated! The printhead is overheated. Turn off the powerand remove the tape cartridge, then leave theproduct until it cools down.Trash at slotRemove trashTape remains in the tape eject slot. Remove thetape.Remove cut tape Unable to start printing because cut tape remainsin the tape eject slot. Remove the tape from thetape eject slot. ProblemUnable to charge Li-ion batteryIs the Li-ion battery correctly installed?Check that the Li-ion battery is correctly installed.Is the AC adapter securely connected?Connect the AC adapter and the power cable firmly to the powersocket of the product, the AC adapter connector and the outlet.Unable to detect the tape correctlyIs the tape cartridge correctly installed?Check that the tape cartridge is correctly installed.Is the label for detecting the tape cartridge clean?If not, wipe the dirt off with a soft cloth.Is the detection sensor of LW-PX900 clean?If not, wipe the dirt off with a soft cloth.MEMOIf none of the above has solved the problem or the symptom isother than the above, contact the K-Sun customer support center.TroubleshootingIncluded ItemsSpecifications Li-ion battery specificationsAmbient temperatureDuring operation 0 to 40 degrees CCharge 0 to 40 degrees CDuring storage Less than 1 month -20 to 50 degrees CLess than 3 month -20 to 40 degrees CLess than 1 year -20 to 20 degrees CCharging informationNominalspecifications Charging current (Std.) 1.0 ACharging voltage (Std.) 8.05 VCharging time Approx. 3 hoursCharge limits Battery pack model C52CE97010Maximum chargecurrent, A 1.0 AMaximum chargevoltage, V 8.4 V1 2 34 5 6 7

/ 2

This manual is suitable for:

LABELWORKS PX LW-PX900

Epson LABELWORKS PX LW-PX900 User Manual

Product

Learn More

Legal