Epson L200 Instructions Manual

Also see for L200: Specifications Service manual User guide Start here User guide

Contents

Start HereRead these instructions before using your printer.L200Match the ink color with thecorrect tank and then fill with inkup to the upper line on the tank.58Seal each bottle with stopper. Do not dispose of inkbottles yet. You will need to enter the codes printed oneach bottle when you install the printer software.7 Repeat steps 3 to 6 for each bottle andcorresponding ink tank.6 Fit ink tank cap securely.4 Replace bottle cap tightly, orink may leak.Do not open ink bottles until you are ready to fill the ink tanks. Ink bottles arevacuum packed to maintain reliability.This product requires careful handling of ink. Ink may splatter when the ink tanks arefilled or refilled with ink. If ink gets on your clothes or belongings, it may not come off.Epson recommends that you wear plastic gloves when filling the ink tanks.9For initial setup Extra black ink3 Remove ink tank cap.Remove only one tank capat a time.1Do not pull inktubes.2When you fill the ink tanks, it is recommended that you place a sheet ofpaper under the ink tank unit. If ink spills, wipe it off immediately to avoidpermanent stains.Keep ink bottles out of the reach of children and do not drink the ink.Fill ink tanks2Be sure to set the transportation lock to the printing positionwhen using the printer, otherwise ink is not delivered and print qualityproblems may occur. Set the transortation lock to the transportposition only when transporting, otherwise ink may leak.1 Remove all protective materials

/ 4

Related manuals for Epson L200