Epson Equity 386/33 PLUS Product Support Bulletin

Also see for Equity 386/33 PLUS: User guide Setup guide Product information guide

EPSON AMERICA, INC. EPSONProduct Support BulletinSubject: Epson Equity 386/33 PLUS and Monochrome Video InstallationDate: 06/04/93 PSB No: S-0162Page(s): 1 of 3 Originator: JAMThis bulletin provides information regarding the installation and compatibility ofMonochrome Video sub-systems.1. Hardware Configuration: Product CodeCPU:Memory:Additional:BIOS Rev:FDD:FDD:HDC:HDD:Video:Display:Epson Equity 386/33+ (A314221)[ Serial Number: 64E2010044 ][ Configured System ]4.0MB Standard, soldered on system boardnot installedD386-6080-031892-K2Canon MD5501 5.25” half-height 1.2MB (A811371)Canon MD 3641G 3.5” half-height 1.44MB (A811381)Integrated on Main Logic BoardQuantum LPS-120 (A811951)EIZO Enhanced MDA[ Monochrome Display Adapter ]Epson Monochrome Monitor[ MBM-2095-E ]Note: The Epson Monochrome Monitor (Model MBM-2095-E) was discontinuedas a sales item as of June 1991. However, it is available as a warrantyexchange item from the parts department.2. Compatibility:Monochrome Display Adapters are compatible on the Epson Equity 386/33Plus system. Pre-configuring system C-MOS is required. Refer to page 2 ofthis document for details.3. Display Symptoms & Causes:System CMOS must be pre-set to successfully install a Monochrome videosub-system. The system will not sync properly after a Monochrome adapterand display are installed. A common complaint at that point is that the systemis dead (no boot activity or keyboard response).