Epson EpiqVision Ultra LS500 Installation Manual

Also see for EpiqVision Ultra LS500: Quick start guide

Epson® EpiqVision™ Ultra LS500Laser Projection TV Installation GuideIMPORTANT: Before using this product, make sure you read these instructions and the safety instructions in theELPSC35/ELPSC36 Safety Guide and online User’s Guide. Visit www.epson.com/support/LS500 (U.S.) orwww.epson.ca/support/LS500 (Canada) to view online guides.Required SuppliesBefore you begin, make sure you have the following items:■ LevelNote: We recommend a bubble level for leveling the furniture and projector, and a laser level for leveling the screen.■ Tape measure■ Electric drill■ Wall bracket mounting screwsNote: You will need 8 screws to attach the supplied wall brackets. Use screws that are appropriate for the wall on which you will mountthe screen.■ Pencil■ Computer with an HDMI output and an Internet connection■ HDMI cable■ Stud finder (if your installation location requires attaching to studs)Note: We recommend that you use painter’s tape to avoid scratching your wall during installation. See “Mounting the Screen” for details.Box ContentsYour Epson EpiqVision Ultra LS500 Laser Projection TV box contains the following items:■ Epson LS500 projector■ Epson ELPSC35 100" or ELPSC36 120" screen■ Cardboard jig for projector positioning■ 2 pairs of white gloves for carrying and mounting the screenVideoVisit www.epson.com/support/LS500 (U.S.) or www.epson.ca/support/LS500 (Canada) to view the supplemental installationvideo.