Printing a BookletYou can also print a booklet that can be created by re-ordering the pages and folding the printout.Note:❏ This feature is not available with borderless printing.❏ If you do not use paper that is suitable for 2-sided printing, the print quality may decline and paper jams may occur.“Paper for 2-Sided Printing” on page 247❏ Depending on the paper and the data, ink may bleed through to the other side of the paper.❏ You cannot perform manual 2-sided printing unless EPSON Status Monitor 3 is enabled. If EPSON Status Monitor 3 isdisabled, access the printer driver window, click Extended Settings on the Maintenance tab, and then select EnableEPSON Status Monitor 3.❏ However, it may not be available when the printer is accessed over a network or is used as a shared printer.1. On the printer driver's Main tab, select the type of long-edge binding you want to use from 2-Sided Printing.2. Click Settings, select Booklet, and then select Center Binding or Side Binding.❏ Center Binding: Use this method when printing a small number of pages that can be stacked and easilyfolded in half.❏ Side Binding. Use this method when printing one sheet (four pages) at a time, folding each in half, and thenputting them together in one volume.3. Click OK.4. Set the other items on the Main and More Options tabs as necessary, and then click OK.5. Click Print.Related Information& “Available Paper and Capacities” on page 245& “Loading Paper in the Rear Paper Feeder” on page 29& “Printing Using Easy Settings” on page 39Printing > Printing Documents > Printing from a Computer - Windows43