Epson ELP-3000 - Data/Video Projector Product Support Bulletin

Also see for P3000 - Digital AV Player: Technical brief User manual User guide Owner's manual Product information

SETTING THE PROJECTOR FOR A SERIAL CONNECTIONAB.C.Turn the projector ON.Press the MENU button.Go to the OPTIONS MENU and make sure the SERIAL option is checkedHINT!: Changing MENUS, SELECTIONS, and FUNCTIONSPRESSINGsync-/+ACTIONChanges Menus (Computer, Video, Display, Audio,OPTIONS, Custom).Bright-/+ Changes between selections within a menu.Vol. - / + Changes the function of a menu selection.D. Exit the MENU mode by pressing the MENU button.INSTALLING TEE PC UTILITIES SOFTWAREHINT!: The ELP UTILITIES software is NOT interchangeable between the ELP-3000and the ELP-3300 projectorsA.B.C.Insert the projector PC Utilities disk into the floppy drive on the computer.For Windows 3.x, select FILE, RUN, A:\SETUP.For Windows 95, select START, RUN, A:\SETUPHINT!: Two utilities will be installed on the computer:ELP LINK This utility is used to make adjustments to the operation of theprojector such as: Brightness, Contrast, Volume etc, from thecomputer.ELP REMOTE This utility is used with the Remote Control Unit. It allows the RemoteControl Unit to be used as a pointing device to move the mouse pointerand to control functions of a software package running on thecomputer, such as a presentation program.RUNNING TEE ELP REMOTE PROGRAMME R UTILITYHINT!: To use the Remote Control Unit to control your software application theELP LINK utility cannot be running.A.B.C.Open the ELP REMOTE PROGRAMMER utility.Select the SPECIAL pull down menu, and make sure Serial Port 1 (Com 1) is checked.From the SPECIAL pull down menu select the ACTIVATE function.D. The Remote Programmer Utility must be left running for the Remote Control Unit tofunction.Page 2 of 4

/ 9

Related manuals for Epson P3000 - Digital AV Player