Epson Disc producer PP-100III User Manual

Also see for Disc Producer PP-100AP: User guide User guide Technical reference guide Setup guide User guide

Troubleshooting 163Incorrect or Missing Colorsn Adjust the color settings in your application or in your printer driver settings.Check the Main window.See the printer driver online Help for details.n Run the head cleaning utility.& See “Cleaning the Print Head” on page 132.n Check the H Ink light. If the light is on, replace the appropriate ink cartridge.& See “Replacing an Ink Cartridge” on page 127.n If you have just replaced an ink cartridge, make sure the date on the ink cartridge or the boxhas not expired. If you have not used the product for a long time, replace the ink cartridges.& See “Replacing an Ink Cartridge” on page 127.Blurry or Smeared Printoutn Use genuine Epson ink cartridges.n Make sure the product is on a flat, stable surface that extends beyond the base in alldirections. The product will not operate properly if it is tilted.n Make sure your disc is not damaged, dirty, or too old.n Make sure your disc is dry and the printable side is facing up.n Make sure the label type selected in the printer driver is appropriate for the type of discloaded in the product.& See “Publishing Discs” on page 24.n Do not touch or allow anything to come into contact with the printed side of a disc with ashiny finish. After printing on a glossy disc, allow the ink to set for a few hours beforehandling it.n Run the head cleaning utility.& See “Cleaning the Print Head” on page 132.