Using Optional Accessories A-3BA4 Position the module so that the notch is aligned with the roundedcorner of the socket.5 Slide the module into the socket at an angle as shown, pressingalong the edge until it clicks into place.6 Press down on the module until it snaps into the retaining clips atthe sides of the socket.7 Place the socket cover on the camera body and press down until itsnaps into place.8 Replace the batteries in the battery compartment and replace thebattery cover as described on page 1-3.When you take your next picture, the pictures remaining number on thecontrol panel shows your camera’s expanded capacity.With expanded memory, you may notice a delay between the time youpress the shutter button and when the camera beeps. You can reduce thisdelay by pressing the button down halfway, holding it until you’re readyto take the picture, and then pressing it down the rest of the way.notchrounded cornerretaining clip
