Epson BrightLink 475Wi Installation Handbook

Also see for BrightLink 475Wi: Start here Installation guide User guide Operation guide Operation guide

Contents

projector light status

INSTALLATION HANDBOOKLamp and Status InformationEpson BrightLink 475Wi / 480i / 485Wi1Projector Light StatusThe lights on the projector's control panel indicate the projector status and let you know when a problemoccurs. Check the status and color of the lights and look for a solution in the table below.1 Power light2 Lamp light3 Temperature lightPower light Lamp light Temperature Status and solutionlightGreen Off Off Normal operation.Flashing green Off Off Warming up. Wait for an image to appear.Orange Off Off Standby or sleep mode.Flashing orange Off Off Preparing network monitoring or shutting down.(Wait for the light to remain orange beforeunplugging the projector.)Flashing red Off Flashing orange Projector is too hot.• Make sure that the vents and air filter are notclogged with dust or obstructed by nearbyobjects.• Make sure the environmental temperature is nottoo hot.• If overheating continues, replace the air filter.

/ 2

Related manuals for Epson BrightLink 475Wi