Epson BrightLink 450Wi Using Manual

Also see for BrightLink 450Wi - Interactive Projector: User guide User guide Start here Installation guide Quick guide

Using the Wall-Mounting Cable Management KitFollow these instructions to install the cable management channels on your wall and place the cables in thechannels.The Wall-Mounting Cable Management Kit includes the parts shown below:1 Plan your cable management layout, referring to the illustration below. If you want to connect two 4-footchannels together (end-to-end), use a seam cover where the channels meet. Use the small connector piecesto turn corners. Use a hacksaw to cut the channels and channel covers to desired lengths.TipWhen using a hacksaw, cut the plastic slowly to maintain smooth edges.NoteThe example shown below is for a typical installation, but yours may vary. For example, if the computer is on the rightside of the screen, you should attach the channels to the wall on the right side instead of the left.Corner connector(3 pieces)Seam cover(10 pieces)4-foot-long channels(4 pieces)Drywall screws(100 pieces)18-inch-long channel(1 piece)CornerconnectorSeamcover

/ 4

Related manuals for Epson BrightLink 450Wi - Interactive Projector