80 Using the Projector Menus■ Power On Protect: Prevents unauthorized use of theprojector. After the projector is plugged in and turned on,you must enter a password to use the projector. Select On,press Enter, then press Esc to return to the Password Protectscreen.■ User’s Logo Protect: Prevents your custom screen (seepage 81), display, and User’s Logo settings in the Extendedmenu from being changed. Select On, press Enter, then pressEsc to return to the Password Protect screen.■ Network Protect: Prevents any of the network settings frombeing changed. Select On, press Enter, then press Esc toreturn to the Password Protect screen.3. Use the arrow buttons to select Password and press Enter.4. When you see a message asking if you want to change thepassword, select Yes and press Enter.5. Hold down the Num button and use the numeric keypad to entera four digit password.6. When you see a confirmation message, re-enter the password.7. Press the Menu button, then press Enter to exit the screen.8. Turn off and unplug the projector.Starting the Projector With a PasswordWhen the password function is enabled, you see this screen when youplug in and turn on the projector:Hold down the Num button and use the numeric keypad to enter thefour digit password.Hold downnoteIf you leave the projectorplugged in, the Passwordscreen will not appear. Itappears only if you unplugand reconnect the powercord.
