Using the Control Panel 110Status and Error MessagesThis section describes the meaning of messages displayed on the LCD screen.The table below describes the status messages.The table below contains error messages, a brief description of each message andsuggestions for correcting the problem.Message DescriptionCancel The print job is canceled.Charging ink The printer is charging the ink.Cleaning The printer is cleaning the print head.Please wait The printer is starting.The printer is initializing the settings.Printing The printer is processing data.Ready The printer is ready to print.Power save The printer is in the power save mode.Power off The printer is shutting down.Message Problem SolutionsService call see guide Service call error occurs. Turn off the printer and then backon. If the error does not clear,contact Epson.& See “Where To Get Help” onpage 182.Printer near end ofservice lifeParts inside the printer are at theend of their service life.Contact Epson to replace theparts.& See “Where To Get Help” onpage 182.Nozzle maint error seeguidePrint head nozzles are clogged ormisaligned.Perform a nozzle check and printhead cleaning.& See “Checking the Print HeadNozzles” on page 137.& See “Cleaning the Print Head”on page 139.Press the OK button to recoverfrom error status.
