Epson Artisan 1430 Start Here Manual

Also see for Artisan 1430: Important safety instructions Range guide User guide Installation instructions Programming guide

Contents

Start HereRead these instructions before using your product.1 UnpackCaution: Do not open ink cartridge packages until you are ready toinstall the ink. Cartridges are vacuum packed to maintain reliability.1 Remove all protective materials.2 Open the printer cover and remove any tape inside.2 Turn on1 Connect the power cord to the back of the printer and toan electrical outlet.Caution: Do not connect to your computer yet.2 Press the power button.3 Install ink cartridges1 Open the printer cover, then open the ink cartridge cover.2 Unpack the ink cartridges.3 Remove only the yellow tape from each cartridge.Caution: Don’t remove any other seals or the cartridgesmay leak.4 Insert the cartridges in the holder for each color. Presseach cartridge down until it clicks.5 Close the ink cartridge cover, then close theprinter cover.6 Press the ink button to begin priming the ink. Thistakes about 3 minutes. Do not turn off the printer, loadpaper, or open any covers until the process is complete.Note: Your printer ships with full cartridges and part of theink from the first cartridges is used for priming the printer.Replacement cartridges will print more pages.Caution: Don’t turn off the printer while it is priming or you’llwaste ink.*412173500**412173500*Artisan®1430

/ 4

Related manuals for Epson Artisan 1430