Epson ActionTower 3000 Computer User Manual

Also see for ActionTower 3000 Computer: Cartridges Replacement User guide User guide Read this first Read this first

Contents

Note that your cache memory sockets may not look exactly likethe ones shown here. If you’re not sure how to install cachememory, contact the EPSON Connection and ask for assistance.Installing the External Cache ChipsFollow these steps to install the external cache chips:1. Locate the external cache memory sockets on the mainsystem board, shown on page 3-5.2. If there is an option card in your way, remove it. Seepage 3-18 for instructions.cautionTo avoid generating static electricity and damaging thecache chips, ground yourself by touching the metalsurface on the inside of the computer’s back panel. Thenremain as stationary as possible while you install them.3. Remove the cache chips from their package and inspectthem. The pins should point inward at slightly less than a90° angle.If any of the pins are bent or crooked, straighten them gentlywith your fingers or with small tweezers to align them withthe other pins. Be careful when you do this; the pins arefragile and can break off easily.3-22 Installing and Removing Options