Continuing From an Error MessageIf your computer has never been set up, you may see an errormessage, such as the following:162 - System options not set(Run SETUP in REFERENCE DISK)(Resume = "F1" key)If you see an error message like this one, follow these steps:1. Press I. The computer beeps and the screen displays amessage, such as the following:Error(s) detectedl Incorrect configurationSet default value ? ( Y / N )The error message next to the diamond indicates thecondition causing the error. There may be more than oneerror listed in the message. Here are some of the errormessages you may see:Time is invalidHDD and/or HDC failed initializationMemory size is incorrect, correction madeCacheable range is adjustedIncorrect configurationChecksum is incorrectHDD is incorrectSome errors, such as Time is invalid, do not allow youto set a default value, so the screen does not display theSet default value prompt. If you see one of theseerrors, press I; the screen displays the main Setupmenu so you can enter a new setting.2-4 Running the Setup Program
