Epson 4.4 Operation Manual

Also see for 1705C - PowerLite XGA LCD Projector: Installation manual User guide Parts list User manual Operation guide

Contents

Using the control functions 37Procedures for new timer settingsProcedureA Click "Add" on the Timer Settings window. The followingwindow is displayed and the new timer settings are applied.For Operation, you can select operations such as turning the poweron and off and switching the input sources, similar to the controlbuttons on the main window. If you set up input source switching,the projector's power will turn on at the timer start time even if it isnot on at the time. Because of this, it is not necessary to make twoseparate timer settings for turning the power on and switching theinput source.B After completing the timer settings, click "OK".The timer settings that have been made will be registered and theycan be checked in the displayed timer list.q You can enable and disable all of the timer settings that have beenregistered. Select Timer - Enable or Disable from the Tool menu.2 DateShows the current day in a red box.Days for which timer settings have been made are shown in bold.Click or to switch to the calendar for the previous or nextmonth.3 TimersShows a list of the timer settings.The line colors in the Timers list have the following meanings:Current day's timer settingWhen some of the projectors in the group have timersetting enabled and others have it disabled for thecurrent day's timer settingWhen the current day's timer setting is a disabled settingTimer setting for a day other than the current day4 DeleteLets you delete timer settings that have been selectedfrom the timer list.5 CloseCloses the Timer Settings window.6 EditLets you change the timer settings that have beenselected from the timer list. If a group has been selectedfor status checking, the settings cannot be changed.7 AddRegisters new timer settings. s "Procedures for newtimer settings" p.378 Enabled/disabledSwitches the timer settings that have been selected fromthe timer list between enabled and disabled.