The illustration below shows a good printer location.Note: Before using a printer stand, read these requirements andsuggestions.l The stand should be able to support at least twice the weight ofthe printer.l Never use a stand that supports the printer at an angle ofmore than 15 degrees from horizontal.l With a cut sheet feeder, your printer must be kept level.l If your paper supply is positioned below the printer stand,make sure there is enough clearance to keep the paper fromcatching on the underside of the stand. Also, make sure thedistance between the stand supports is wide enough for thepaper you are using.l Position your printer’s cables so that they do not interfere withpaper feeding. If possible, secure the cables to the printer stand.1-6 Setting Up the Printer
