Electrolux WEK 7 Service Manual

Contents

troubleshooting

DGS-TDS-N 05.2006 © Electrolux 6 168 6504. TroubleshootingFault Possible cause RemedyAppliance not working Appliance is not switched onCompressor 5 Min. forcedinterruption for pressurecompensationPlug is not inserted or is loose.Fuse is defectPower outlet is defectPresentation mode is activeSwitch appliance on.Insert plug.Check or replace fuse.Have power supply defect repairedby an electrical specialist.DeactivateThe chillingtemperature isinsufficientTemperature is not correctly setDoor was opened too long.Ventilator defectInspect door sealAppliance is next to a heat sourceGlass door is cracked or brokenGlass door is mounted cantedCompressor defect, irregularoperating sound.Please refer to the operatingfunctions.Do not leave the door open for longerthan 2-3 minutes (alarm sounds after5 minutes and can be deactivated bybriefly pressing any button).Replace ventilator (see 6.3.6 )Replace door seal (see 6.1.4 ).Please refer to "place of installation"in the instruction manual.Replace glass door (see 6.1.2).Adjust glass door (see 6.1.1).The repair is only to be carried out bya workshop designed for thispurpose.Risk of explosionInterior lighting notworkingLight does not go outLED is defectLED plug is not correctly insertedMagnet missing of incorrectly fittedSensor bent (magnetic field noteffective)Permanent mode activatedReplace LED (see 6.2.2).Inspect plug-in connection (see6.2.2).Check light switch (see 6.1.3 ).Align sensor (see 6.1.3 ).Deactivate permanent mode