Menu
Electrolux W 345 B/M Manual For Use And Maintenance
              | |
1 32 45 6 7 8 9TROUBLE SHOOTING21MACHINE CONTROLS41011121314151617181920PROBLEM POSSIBLE CAUSE CHECKNothing works. No power. Is the battery plugged in.Is the mains lead plugged inand switched on.Is the mains socket live.No liquid supply to thebrushes.Is the tank empty. Fill the tank.Are the brushes revolving andthe machine moving as wellas the flow control activated.Try this sequence.Is the tank filter blocked. Remove and clean.Are the solenoid valvesblocked.Remove and clean.Are the pipes blocked. Flush through with clean hotwater.Squeegee is not drying thefloor well.Blockage in hose. Remove and flush throughwith water.Worn sgueegee not sittingfully on floor.Adjust pressure and rake.Torn tank lid gasket. ReplaceAll indicators flashing whenkey switched on.Traction control not in neutralposition.Centre the traction controlthen switch the key on.All 3 indicators of the batterycondition meter flashing.Traction drive electronicsfaulty.Call Service Engineer. orReplace P.C.B.3 indicators of batterycondition meter flashing insequenceOverload in electrical circuit. Will reset when cooleddown. Check motor currentsfor overload, or tightbearings etc.211- Scrubbing detergent flow adjustmentpush button2- Suction on/off push button3- Brush motor on/off push button4- Run-time hour meter5- Scrubbing detergent flow boost pumpon/off push button6- Recovery tank full warning indicator7- Brush release push button8- Battery condition voltmeter9- Master key-switch10- Drive function control11- Switch for the speed selection12- Scrubbing detergent tank emptyinghose13- Handle height adjustment locking hand-wheel14- Drive motor on/off switch15- Squeegee control lever16- Recovery tank emptying hose17- Squeegee18- Brush pressure control hand-wheel19- Squeegee pressure control20- Squeegee rake angle control21- Brush lift/lower pedal |
Related manuals for Electrolux W 345 B/M
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved