Electrolux Oxygen User Manual

Also see for Oxygen: Installation manual Owner's guide Owner's manual

6b1a1b42 35 6a 78+10 9+12 11EnglishR E P L A C I N G T H E S - B A G ™ / C L E A N I N G T H E F I LT E R1 The S-bag™ should be changed when the indicator win-dow is completely red. Read with the nozzle lifted up (1a),or when the window lights up (1b).2 Remove the hose and open the lid.3 Pull the cardboard holder to remove the s-bag™.4 Insert a new bag by pushing the cardboard holder straightdown in its tracks. Close the lid.Note! If the dust bag is obstructed, be sure to replace it immediatelyeven if it is not full. Also replace after vacuuming carpet-cleaningpowder. Be sure to use only an original Electrolux s-bag™ (Ref. No.E200), s-bag™ Clinic (Ref. No. E202).Replacing the motor filter (Ref. No. EF54) and charcoalfilter (Ref. No. EF28)5 Remove the old filter (do this for each 5th replacement ofthe dust bag).6 Insert a new filter in the groove. (6a). (To make replacementeasier, open the lid by pressing on it as shown in picture 6b.)7 Replace the filter and close the lid.Replacing the micro filter (Ref. No. EF17) or the nonwashable HEPA filter8 Open and remove the lid, then remove the filter (do this foreach 5th replacement of the dust bag).9 Insert a new filter and replace the lid as shown.Cleaning the washable HEPA filter (Ref. No. EF26a)(For each 5th replacement of the dust bag)10 Open and remove the lid, then remove the filter.11 Rinse the inside (dirty side) of the filter under warm tapwater. Tap the filter frame to remove excess water. Repeatfour times and allow the filter to dry.Note! Do not use cleaning agents and avoid touching the delicate fil-ter surface.12 Replace the filter and lid as shown.85

/ 9

Related manuals for Electrolux Oxygen