Dual-Fuel Freestanding RangeE36DF76GPS professional seriesHigh standards of quality at Electrolux Home Products, Inc. mean we areconstantly working to improve our products. We reserve the right to changespecifications or discontinue models without notice.Electrolux Major Appliances, N.A.USA • 10200 David Taylor Drive • Charlotte, NC 28262 • 1-877-4electrolux (1-877-435-3287) • electroluxicon.comCANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • electroluxicon.caE36DF76GPS 04/11 © 2011 Electrolux Home Products, Inc. Printed in the U.S.A.36" Dual-Fuel Freestanding Range Specifications• Product Weight – 352 Lbs.• Single phase 3- or 4-wire cable, 120 / 240 or 120 / 208 Volt,60 Hertz AC only electrical supply with ground required on separatecircuit fused on both sides of line.• Connected Load (kW Rating) @ 240 / 208 Volts = 6.5 / 4.8 kW• Amps @ 240 / 208 Volts = 27 / 23 Amps• Recommended Circuit Breaker – 30 Amps• Always consult local and national electric and gas codes.• Range ships with 3/4" factory regulator.• LP Gas conversion kit supplied.• Overhead cabinetry should not exceed a 13" maximum depth.• Allow 34" minimum clearance between top of rangetop and bottom ofunprotected wood or metal overhead cabinetry.• Absolute minimum horizontal distance between overhead cabinetsinstalled to either side of appliance must be no less than maximum widthof appliance.• Allow 9" minimum clearance from edge of rangetop to nearestcombustible wall on either side of unit.• Allow 28" minimum clearance when bottom of wood or metal overheadcabinet is protected by not less than 1/8" flame-retardant millboardcovered with not less than No. 28 MGS sheet steel, 0.015" stainlesssteel, 0.024" aluminum or 0.020" copper.• To reduce risk of fire when using overhead cabinetry, install vent hoodthat projects horizontally a recommended minimum of 5" beyondbottom of cabinets.Note: For planning purposes only. Refer to Product Installation Guideon the web at electroluxicon.com for detailed instructions.Optional Accessories• 9" Stainless Steel Backsplash – (PN # 903104-9100).• 12" Stainless Steel Backsplash – (PN # 903105-9100).• Stainless Steel Island Trim Kit (for use in placeof backsplash) – (PN # 903106-9100).• 4" Stainless Steel Kick Plate – (PN # 318352652).• Black Knobs Kit – (PN # 903108-9020).