Electrolux ICON Designer E30EC70FSS Installation Instructions Manual

Also see for ICON Designer E30EC70FSS: Design guide Specifications Specifications Factory parts catalog Specifications

Contents

1ELECTRIC COOKTOP INSTALLATION INSTRUCTIONSAIBCGH30” Min. *(76.2 cm)EF DAll dimensions are in inches (cm).* Allow 2" (5 cm) space below cooktop to clear the electric cable and allow for installation of the junction box on thewall at the back of the cooktop.INSTALLATION AND SERVICE MUST BE PERFORMED BY A QUALIFIED INSTALLER.IMPORTANT: SAVE FOR LOCAL ELECTRICAL INSPECTOR'S USE.READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.FOR YOUR SAFETY: Do not store or use gasoline or other flammable vapors and liquids inthe vicinity of this or any other appliance.P/N 318201432 (0608) Rev. CEnglish – pages 1-5Español – pages 6-10Français - pages 11-15Notes - 16Cooktop Dimensions IMPORTANT INSTALLATION INFORMATION• All electric cooktops run off a single phase, three-wireor four-wire cable, 240/208 volt, 60 hertz, AC onlyelectrical supply with ground.• Minimum distance between cooktop and overheadcabinetry is 30" (76.2 cm).* 30" (76.2 cm) min. for unprotected cabinet24" (61 cm) min. for protected surfaceCooktop CutoutDimensionsFigure 1WARNINGPRODUCT DIMENSIONSMODEL A. WIDTH B. DEPTH C. HEIGHT D. E. BOX WIDTH F. BOX DEPTH30" Ceramic Model 30¾ (78.1) 21½ (54.6) 2¾ (7) 4¾ (12.1) 28 7 / 8 (73.3) 19 5 / 8 (49.8)36" Ceramic Model 36¾ (93.3) 21½ (54.6) 2¾ (7) 4¾ (12.1) 34 7 / 8 (88.6) 19 5 / 8 (49.8)CUT OUT DIMENSIONSG. WIDTH H. DEPTH I. HEIGHT BELOWMODEL MINIMUM MAXIMUM MINIMUM MAXIMUM COOKTOP*30" Ceramic Model 29 7 / 8 (75.9) 30 (76.2) 20 1 / 8 (51.1) 20¼ (51.4) 6 (15.2)36" Ceramic Model 35 7 / 8 (91.1) 36 (91.4) 20 1 / 8 (51.1) 20¼ (51.4) 6 (15.2)Printed in United States4" X 8" (10.2 cm x 20.3 cm)opening to route armored cableif a panel is present