English - 39 -PC Mode Menu SystemSee the “Connecting the LCD TV to a PC”section for connecting a PC to the TV set.For switching to PC source, press the AVbutton on your remote control and select PCinput.Note that PC mode menu settings areavailable only while the TV is in PC source.Sound menuThe items in this menu are described at“Sound Menu” section explained in the “MenuSystem” section.Feature menuFeature menu settings are identical to thesettings explained in “Feature Menu” sectionin the “Menu System” section.PC picture menuSelect PC Picture menu by pressing / buttonand then press button. PC Picture menuappears on the screen. Brightness, Contrast andColour Temperature adjustments in this menuare identical to adjustments defined in TV picturemenu in “Menu System” part.Geometry menuSelect the fourth icon by pressing / buttonand then press button. Geometry menuappears on the screen:GEOMETRYH PositionV PositionClockPhaseAuto AdjustmentBack : Menu Exit : TVH. (Horizontal) positionThis item shifts the image horizontally to righthand side or left hand side of the screen.Select H. position by pressing / button.Use / button to adjust the value.V. (Vertical) positionThis item shifts the image vertically towardsthe top or bottom of the screen.Select V. position by pressing / button.Use / button to adjust the value.ClockClock adjustments correct interference thatappear as vertical banding in dot intensivepresentations like spreadsheets orparagraphs or text in smaller fonts.Select Clock by pressing / button. Use / button to adjust the value.PhaseDepending on the resolution and scanfrequency that you input to the TV set, you maysee a hazy or noisy picture on the screen. Insuch a case, you can use this item to get aclear picture by trial and error method.Select Phase by pressing / button. Use / button to adjust the value.Auto adjustmentIf you shift the picture horizontally or verticallyto an unwanted position, use this item to putthe picture into correct place automatically.Select Auto Adjustment item by using /buttons. Press or OK button.Warning: Auto position adjustment recommendedto be done with the full screen image forthe proper adjustment.