Electrolux EPH09MLIW User Manual

Also see for EPH09MLIW: User manual User manual

ENGLISH 118 °C heating functionIn HEAT mode, simultaneously pressthe ION-FILTER button and the CLOCKbutton to enable or disable the 8 °Cheating function. The display shows”8 °C” (”46 °F”). The unit starts to heatwhen the temperature drops below8 °C. Fan Speed will be AUTO andcannot be changed.Replacng the batteriesThe remote control operates with two1.5V AAA batteries.1. Open the battery compartment.2. Remove the old batteries.3. Insert the new batteries. Make surethat the positive (+) and negative (-)markings on the batteries match thepositive (+) and negative (-) markingson the battery compartment.4. Close the battery compartment.CAUTIONr© !LWAYS©USE©NEW©BATTERIES©OF©THE©SAME©type. Do not use old batteries ordifferent batteries types.r© 2EMOVE©THE©BATTERIES©WHEN©THE©remote control will not be used for along time.NOTEr© /PERATE©THE©REMOTE©CONTROL©WITHIN©ITS©transmitting and receiving range.r© /PERATE©THE©REMOTE©CONTROL©AT©LEAST©1 m away from your TV set or stereosound set.r© !IM©THE©REMOTE©CONTROL©AT©THE©RECEIVER©of the main unit to improve thereceiving sensitivity of the main unit.r© )F©THE©REMOTE©CONTROL©TRANSMITS©A©signal, the transmitting symbol willblink for 1 second. The bell will ring ifthe main unit receives the signal.r© )F©THE©REMOTE©CONTROL©DOES©NOT©OPERATE©normally, remove the batteriesand insert them again 30 secondslater. If the remote control still doesnot operate normally, replace thebatteries.Emergency operationIf the remote control cannot be used,use the AUTO/STOP button on themain unit. The unit will operate in AUTOmode. The temperature or fan speedcannot be changed.1. Press the AUTO/STOP buttonto switch on the unit. The unitautomatically sets the operationmode.2. Press the AUTO/STOP button againto switch off the unit.Mode Model Temperature setting Fan speedAUTO Cooling only 25 °C (COOL, FAN) AUTOAUTO Heat pump 25 °C (COOL, FAN) AUTOAUTO Heat pump 20 °C (HEAT) AUTO