Electrolux ELAP15 Manual 

Also see for ELAP15: Owner's manual

Contents

9AIR CLEANER SET-UPElectrolux Customer Service 1-800-896-9756ELAP45Place the unit away from drafty areas, as the sensors may not reactaccurately. Do not place near curtains, furniture, or other items thatmight inhibit air flow. Place the unit on a stable surface.1. Remove protective film from the control panel.2. Remove the front panel by pulling gently from the top portion ofthe panel.3. Remove the Filter Cassette and remove the plastic wrapperfrom it.4. Install the Filter Cassette by gently sliding the entire cassette intothe air cleaner. It should fit perfectly.5. Replace the front panel by hooking the panel on the bottom of the unit.6. Plug the power cord into a wall outlet.7. Press and hold the POWER button until a short “beep” sounds.8. The air cleaner will take 3-4 minutes to calibrate the air quality sensor.During this time the sensor lights will flash on and off. Once the sensorhas calibrated, the lights will be on “AUTO” mode.airCleanerOG.qxp_AirFilter_English 1/20/14 12:05 PM Page 9