Menu
Electrolux EIH/S-1500 3BE EEC User Manual
                                                |
8www.home-comfort.com1. Wall mounted installation option(bracket and mounting templateincluded)Use the brackets to mount the heater onthe wall according to the pictures below.The distance from the device to the floorand surrounding objects must be at least 10cm (Figure 5):To install the bracket on a wall, follow thesesteps:• Attach the mounting template to the wallin the place where you plan to placethe vector.• Mark and drill holes.• Place the bracket on the wall and secureit with the fasteners.Fix the device to the bracket as follows(Figure 6):• Place the lower part of the convector ontothe bracket using the special holes locatedin the lower part of the convector.• Slide the upper part of the convector ontothe bracket, fixing it with the latches on thebracket.Figure. 6Figure. 7Malfunctionsymptom Cause of malfunction Troubleshooting stepsNo heating1) There is no power supply.2) The convector is in standby mode.3) The actual room temperature is higherthan the thermostat setting.1) Establish a reliable connection.2) Set the convector to operatingmode.3) Adjust the temperature mode of theconvector.Smell of burnt dustwhen first turned on Not a malfunction The smell disappears after a fewminutes of convector operationIf after trying all the troubleshooting steps, the problem is not resolved, contact an authorized service cen-ter in your area or your sales representative.Troubleshooting |
Related manuals for Electrolux EIH/S-1500 3BE EEC
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved