Electrolux E786W303BI User Manual

20O20O45O45O3. Connect the hose to the back of theappliance. Do not turn the inlet hosedownwards, but turn it left or right dependingon the position of your water tap.4. Loosen the ring nut to fix it in the correctposition.5. Connect the water inlet hose to the coldwater tap with 3/4 thread.WARNING!Make sure that there are noleaks from the couplings.Use the hose supplied with appliance.Do not use an extension hose if the inlet hose is too short. Contact theAuthorised Service Centre for an inlet hose replacement.Water drainageThe drain hose can be connected:Ø 40 mmTo a stand pipe with vent-holeDirectly into a drain pipe at a height of notless than 60 cm (23.6”) and not more than100 cm (39.3”).The end of the drain hose must always beventilated , i.e. the inner diameter of the drainpipe (min. 40 mm - min. 1.6”) must be largerthan the external diameter of the drain hose.www.electrolux.com12