6 www.electroluxaircomfort.comFor the Delay Start, the fan speed and humiditymaintained will be the same as previous setting.After TIMER setting fi nishes, pressing TIMERbutton again at any time will stop the TIMERfunction. The Delay Start/Stop Feature will workuntil the unit either starts or stops. Once thathappens the above steps have to be repeated.• Before entering TIMER setting, make surepower is being supplied to the unit.• Before entering TIMER setting, make surepressing HUMIDITY or button sets onedesired room humidity fi rst.7. To shut the unit down, press the ON/ OFFbutton .Fault codesIf the display reads “AS” or “ES” , a sensor hasfailed. Contact your Authorized Service Center.Removing collected waterEmptying the Bucket:1. When the bucket is full, the unit will shutdown and the BUCKET FULL indicator willilluminate.2. Do not move the unit at this time otherwisewater may spill on the fl oor.3. Press sides of bucket gently to unclip thebucket from the unit.4. Remove the bucket as shown in the fi guresbelow and empty the bucket.5. Replace the empty bucket back into the unitand once seated correctly, the unit will startup again.6. You should hear a click when the bucket is inthe correct positionWarning!Discard water from bucket. Water is not potableand cannot be used for drinking.