8Figure 2Figure 1Setting ControlSETTING HUMIDITY CONTROLLERFigure 3To Set the Humidity ControllerThe humidity controller is located on the inside of the warmer drawer and used tocontrol humidity in the warmer drawer. The humidity control knob can be set at anyposition between Moist (Figure 1) and Crispy (Figure 2) position. To set thehumidity controller, slightly unscrew the knob, slide the controller to the desiredlocation and screw the knob (closed) in place.To Enable the Bread Proof FeatureAt anytime when the unit is ON, press the pad on the warmer drawer digital controls.The display will show “brPF”, indicating that the warmer drawer is in Bread Proof mode.Wait a few seconds for the controls to accept the input.SETTING BREAD PROOF CONTROLPreparing Bread Dough for the Warmer DrawerThe Warmer Drawer has a Bread Proof feature that can be used to helpprepare bread dough. The recommended length of time to keep bread doughin the Warmer Drawer is about 45-60 minutes. Be sure however to follow therecipe’s recommended times.The unrisen bread dough should be placed in a large bowl since the dough willnearly double in volume. Place the Warmer Drawer Rack in the downwardposition (see Figure 3). Before placing in the Warmer Drawer, cover the bowlwith a moist cloth or use wax paper that has been coated with a non-stick typecooking spray.NOTE : The bread proof function uses low warming temperature which couldhappen to be lower than your room temperature. The drawer will not work asa cooling device and will not be able to lower the temperature under theambient temperature.