Electrolux 315 Operator's Manual

Contents

12E N G L I S HYour chain saw features a slip clutch which protects it from overload.The slip clutch may require cleaning after long periods of operation.Contact your nearest service dealer in the event of malfunction.SLIP CLUTCHCHAIN CATCHERRIGHT HANDGUARDThe chain catcher is designed to catch a chain which breaks or jumps outof its groove. This problem will generally be avoided, however, if the chain istensioned properly (see chapter on «Assembly and Adjustment of Guide Barand Chain») and the chain and guide bar properly maintained.Ensure that the CHAIN CATCHER is undamaged.The right handguard protects the right hand in the event that the chain breaks orjumps out of its groove, as well as keeping twigs and branches from interferingwith your grip on the handle.Ensure that the RIGHT HANDGUARD is undamaged.The 2000W electric chain saw is provided with electronic overload protection.• When the overload protection trips, the saw stops.• Release the power trigger. Ensure that the chain is not stuck.• Squeeze the power trigger again.ELECTRONIC OVERLOAD PROTECTION 2000W