Electrolux 183159 Owner's Manual

Contents

6026440264502643BAGGER SUPPORT ASSEMBLY(See Figs. 2A & 2B)NOTE: If your tractor already has four (4) shoulder boltsinstalled on the rear drawbar, simply hang the support as-sembly on the bolts. Discard the four (4) shoulder boltssupplied and go on to Step 3 instructions.2SELFTAPPINGSHOULDERBOLTSFIG. 2CPULL OUT ON STOP BRACKET TOREMOVE SUPPORT ASSEMBLYFIG. 2BIf your tractor does not have four (4) shoulder bolts installedon the drawbar, follow the instructions below.Use Hardware - - GROUP "B"1. Using the four formed holes in the drawbar, install thefour shoulder bolts as shown and tighten securely.2. Hang the support assembly on the bolts.SHOULDERBOLTSFIG. 2ATO REMOVE THE SUPPORT ASSEMBLY (SeeFig. 2C)1. Pull outward on the stop bracket enough to allow supportassembly to be lifted up and away from drawbar.3FIG. 3MOUNTING COVER ASSEMBLY TOSUPPORT ASSEMBLY (See Fig. 3)NOTE: For ease of assembly, you may wish to obtain theas sistance of another person for mounting cover assemblyto tractor.1. Position cover assembly on ground behind tractor asshown.2. Lift and rotate cover to align cover bracket with supportassembly.3. Slide cover assembly down onto the supportassembly.02646COVERASSEMBLYSUPPORTASSEMBLYSUPPORTASSEMBLYSUPPORTASSEMBLY