Econ ERIKS Installation & Operation Manual

Also see for ERIKS: Installation & operation manual

Econ ERIKS Installation & Operation Manual Manual pdf 1 page image

Installation & Operation ManualProven Quality since 1892ECON ball valves Fig. 7422, 7442, 7522, 7542, 7622, 7642, 7722, 7742 www.eriks.comRev.4 Page 1Content1. ERIKS operating companies2. Product description3. Requirements for maintenance staff4. Transport and storage5. Function6. Application7. Installation8. Maintenance9. Service and repair10. Troubleshooting11. Removal1. ERIKS operating companiesECON ball valves are being delivered by several ERIKS operating companies on a worldwidebasis. In this manual these will be referred to as ‘ERIKS’, the individual terms of delivery of theERIKS operating company having executed the order are applicable.2. Product descriptionThe ECON ball valves are designed according the information in our latest catalogue or see ourwebsite www.eriks.com and should be used in accordance with the applicable pressure-temperature rating as stated on this website. Ball valves are provided with marking, according toEN 19. The marking makes the identification of the valve easier and contains:- size (inch)- pressure rating class- body material marking- ECON logo- heat numbers3. Requirements for maintenance staffThe staff assigned to do assembly, operating and maintenance tasks should be qualified to carryout such jobs and in any circumstance, ensure personal safety4. Transport and storageDuring transport and storage the valves should be protected against external forces, influence anddestruction of the painting layer as well. The purpose of the painting layer is to protect the valveagainst rust, during transport and storage. The valves should be stored in an unpolluted spaceand should also be protected against all atmospheric circumstances. There should be taken careof the temperature and humidity in the room, in order to prevent condensate formation.5. FunctionECON ball valves are designed to stop the flow of a medium. The valve is closed by turning thelever clockwise; please don’t use tools to increase the torque on the lever.6. ApplicationThe ECON ball valves are used for industrial systems gasses and liquids. The valves aredesigned for standard operating conditions. For the use of extreme conditions e.g. aggressive orabrasive media, it is recommended to mention this at the ordering stage, to verify whether thevalve is suitable. The installation designer is responsible for the valve selection, suitable for theworking conditions. The valves are unsuitable, without written permission of an ERIKS company,to apply for hazardous media as referred into Regulation (EC) No 1272/2008..