Dell W2607C Supplementary Manual

Also see for W2607C: Product information guide Owner's manual Owner's manual Service manual

Information in this document is subject to change without notice.© 2006 Dell Inc. All rights reserved.Image Settings for PC ConnectivityReproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.Other trademarks and trade names may be used in this document to refer to either the entitiesclaiming the marks and names or their products. Dell Inc. disclaim s any proprietary interest intrademarks and trade names other than its own.Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.Auto Adjust - Allows the monitor to self-adjust to the incoming video signal.After using Auto Adjustment, with VGA input, you can further tune your monitorby using the Pixel Clock (Coarse) and Phase (Fine) controls under Image Settings.menu, see Fig. 1.Phase - Use the VOL - and VOL + buttons to make adjustments.(Minimum: 0 ~ Maximum: 63)Pixel Clock - Use the VOL - and VOL + buttons to make adjustments.(Minimum: 0 ~ Maximum: 100)If satisfactory results are not obtained using the Phase adjustment,use Pixel Clock (Coarse) and then use Phase (fine), again.NOTE: Pixel Clock (Coarse) may change the width of the display image.Use the H.Position/V.Position of the Size & Position menuto center the display image on the screen, see Fig. 2.IMAGESETTINGSCOLORSETTINGSSIZE&POSITIONIMAGE SETTINGSAUTO ADJUSTBACKYES NOPHASEPIXEL CLOCKIMAGESETTINGSCOLORSETTINGSSIZE&POSITION5050SIZE AND POSITIONH.POSITIONV.POSITIONFULL ASPECT RATIOFULL SCREEN1:1In case VGA/DVI inputs default settings do not provide satisfactory image,refer to the following for additional information on image adjustment features.Fig. 1 Fig. 2

/ 4

Related manuals for Dell W2607C