Dell Latitude E4200 System Board Replacement

Also see for Latitude E6400 XFR: How-to guide Service manual Service manual Setup and features information Installation instructions

Contents

Replacing the System BoardAbout WarningsWARNING: A WARNING indicates a potential for property damage, personal injury,or death.Setting the AMT Manageability ModeNOTE: For Dell™ Latitude™ E5400 and E5500 computers, and for Dell Precision™M6400 Mobile Workstations, skip this section and see "Programming the Service Tag"on page 3.WARNING: Before you begin any of the procedures in this section, read the safetyinformation that shipped with your computer. For additional safety best practices,see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.WARNING: If you need to remove the bottom access panel, first disconnect theAC adapter and modem cables from all electrical outlets.CAUTION: Follow the instructions carefully to ensure that you configure thecomputer for the correct management mode.1 Remove the bottom access panel (see your Service Manual).2 Take note of the label that is attached to the inside of the bottom access panel.labellabelMarch 2009

/ 4

Related manuals for Dell Latitude E6400 XFR