Dell Dimension 9200 Service Manual

Also see for 9200: Owner's manual Owner's manual Setup guide Owner's manual Getting started guide

Contents

Contact UsShop Services & Warranties Support Resource Center Account Keyword SearchYou are here: Dell USA > Support Home PageMy Account My Order StatusBack to Contents PageBefore You BeginDell™ Dimension™ 9200 Service ManualGetting StartedRecommended ToolsTurning Off Your ComputerBefore Working Inside Your ComputerGetting StartedThis manual provides procedures for removing and replacing the components in your computer. Unless otherwisenoted, each procedure assumes that the following conditions exist:z You have performed the steps in Turning Off Your Computer and Before Working Inside Your Computer in this section.z You have read the safety information in your Dell™ Product Information Guide.z A component can be replaced by performing the removal procedure in reverse order.Recommended ToolsThe procedures in this document may require the following tools:z Small flat-blade screwdriverz Phillips screwdriverz Long Phillips screwdriverz Flash BIOS update program (download from support.dell.com)Turning Off Your Computer1. Shut down the operating system:a. Save and close any open files, exit any open programs, click the Start button, and then click Shutdown.b. In the Shut Down Windows window, select Shut down.The computer turns off after the operating system shutdown process finishes.2. Ensure that the computer and any attached devices are turned off. If your computer and attached devices didnot automatically turn off when you shut down your operating system, press and hold the power button for 4seconds.NOTICE: To avoid losing data, save and close any open files and exit any open programs before you turn offyour computer.Cart Sign InTechnical Support Customer Service Warranty Information Dell Forums Contact UsPage 1 of 2Documentation12/9/2007http://support.dell.com/support/edocs/systems/dim9200/en/SM_EN/before.htm