Dell C8618QT Quick Start Manual

Also see for C8618QT: User guide User guide

1Go to contents pageDELL C8618QTTake out the whole monitor from the EPS-bottom.Remove the PE bag from top to bottom, and put themonitor on ESD protection foam.Cut off 4pcs straps first ,then remove 12pcs cartonlocks, then use a proper tool to open the carton, andthen remove the angle papers, top cartons and 2pcspaper box. Tearing off the caution techsheet. RemoveEPS-Tops with PC box, QSG and accessories PEbag(CD, battery, 3pcs wire saddle, 2pcs stylus, Stylusholder, remote control, remote control holder, VGAcable, HDMI cable, DP cable and USB cablesEU+USA cable and power cable).S1S21. Disassembly Procedures: Remove the 4pcs rubbers. Use a screwdriver tohandles.Remove 54pcs screws for unlocking2pcs rear covers .remove 8pcs screws for releasing the.(Torque:16±1kgf)(Torque: 3.8±0.3kgf)S3S4 Remove 27pcs black tapes for releasing the cablesas the picture below shown.Disconnect IR cable from the connectors of IR boardwith main board. Disconnect the speakers’ cable fromthe connector of the main board. Disconnect functionkey cable from the connector of the main board.Disconnect LVDS cable from connectors of T-COBboard and main board. Disconnect touch&USB cablefrom the connectors of touch board with USB board.Disconnect all the connector cables from the connectorof the power board and AC board and main board.Use a screwdriver to remove 8pcs screws forunlocking the two speakers, remove 1pcs groundingscrew for removing the AC outlet.(Torque: 3.8±0.3kgf)caution techsheet1 2carton lockS51234567

/ 5

Related manuals for Dell C8618QT