See "Testing Fax line connection".The printer is monitoring line condition while it isreceiving or sending a fax job. If an error occurs during thetransmission and the ECM Mode setting is On, the printermay request that the portion of the fax job to be resent.You should turn off ECM Mode only if you are havingtrouble sending or receiving a fax job, and you are willingto accept the errors in the transmission job. Turning off thesetting might be useful when you are trying to send a faxlong distant or receive from long distant (example: othercountries etc.)The printer might be out of paper and the memory isfull.The printer cannotreceive faxes from anextension telephone.The fax cable might not be securely connected.The printer dialing mode might be incorrectly set, orthe extension phone might be incorrectly set.Faxes are notreceived automatically.The Fax mode should be selected.Make sure that there is paper in the paper tray.Check to see if the display shows Memory Full.The Receiving faxhas blank spaces or isreceived in poor-quality.A noisy phone line can cause line errors.Check your printer by making a copy.Receiving faxes aretoo light.The printer might be running out of toner while printing afax. Under Toner empty conditions, the printer will store the faxjob into memory, as soon as possible, replace the print cartridge,and then reprint the fax.Faxes are printed on twopages instead of one.The auto reduction setting may be turned Off, try enablingthis settingReceiving Faxes arenot been printed by theprinterReceive Forward feature might be turned Off, tryenabling this setting. You can set the printer to forward allincoming faxes to specified e-mail addresses. Please carry outLine Test from Op-panel to confirm line status. See "Testing Faxline connection".The printer is notsending fax.If your printer is on a PBX system, the PBX systemmight be generating a dial tone that the printer cannotdetect.Fax Line might have signal integration issues. Pleasecarry out Line Test from Op-panel to confirm line status.See "Testing Fax line connection".No dial tone sound. Check that the phone line is connected properly.Please carry out Line Test from Op-panel to confirm linestatus. See "Testing Fax line connection".Check that the phone socket in the wall is working byplugging in another phone.Fax Line might have signal integration issues. Pleasecarry out Line Test from Op-panel to confirm line status.See "Testing Fax line connection".Fax Line might have signal integration issues. Pleasecarry out Dial Tone Test from Op-panel to confirm linestatus. See "Testing Fax line connection".Downloaded from ManualsPrinter.com Manuals
