Datasheen D902AC User Manual

Also see for D902AC: Quick installation guide

Contents

Datasheen D902AC User Manual Manual pdf 6 page image

Datasheen D902AC User ManualPage 6 Total 25 Pages3. CONFIGURATION3.1 DEFAULT CONFIGURATIONADSL MODEM has pre-configured with the VCI/VPI which is in common use. The default dial-up modeis bridge encapsulation. For bridge mode, no need to configure any more parameter. However, the third partydial-up software is needed for connection with the Internet.3.2 COMPUTER CONFIGURATIONThe default IP address for ADSL MODEM is: 192.168.1.1; The Subnet Mask is：255.255.255.0. Users canconfigure ADSL MODEM through an Internet browser. ADSL MODEM can be used as gateway and DNSserver; users need to set the computer’s TCP/IP protocol as follow:1、 Set the computer IP address at same segment of ADSL MODEM, such as set the IP address of thenetwork card to one of the “192.168.1.2”～ “192.168.1.254”.2、 Set the computer’s gateway the same IP address as the ADSL Modem’s.3、 Set computer’s DNS server the same as ADSL Modem’s IP address or that of an effective DNS server.3.3 ADSL MODEM CONFIGURATION3.3.1 LOG INOpen the browser; input http://192.168.1.1 at the address column. Press “Enter” key then the entry dialogbox will show up as Figure 3.1. Input Username: admin ,Password: password (capital sensitive), then pressEnter.Figure 3.13.3.2 SAVE SETTINGAfter getting through each page for parameters setting, click “Save” or “Save apply” to store the value inADSL MODEM. Briefly, we named “Save”.