Datapath activesqx User Manual

Contents

Datapath activesqx User Manual Manual pdf 11 page image

10SpecificationBoard Format PCI Express x4 (electrically) half length, full height, Gen.2 PCIe card. The cardcan physically be plugged into a X4, X8 or X16 slot.Connectors (main board) 2 x RJ45 Ethernet ports, 1 x DisplayPort output connector (reserved for futureuse)Ethernet Dual 1000 Base-T Ethernet portsDHCP or static IP supportIPv4 and IPv6Streaming Protocols HTTP, RTSP & MPEG2-TS supportMulticast& Unicast supportCodec Support • H.264 (Mpeg4 Part 10 AVC), Mpeg4 Part 2, VC-1 & Mpeg2 part 2 andMJPEGH.264 Decode • Upto 3 x 4096x2160p @30fps or• 6 x 1920x1080p @ 60fps / 12 @ 30fps• 50+ D1 @30fpsDe-interlacing SupportedScaling Hardware downscaling prior to DMA transfer. 1 : 1 transfer for upscale afterDMAVideo Capture Memory 4GBH.264 Profiles Constrained Baseline Profile (CBP) / Main Profile (MP) / High Profile (HiP)H.264 Levels Level 3 / 3.1 / 4 /4.1 / 4.2 /5 / 5.1/5.2Colour Format NV12 4:2:0 Support.DMA Engine Direct DMA to physical or virtual memory buffers with full scatter-gathersupport. DMA bandwidth : up to 1.3GB/s.Carousel IP Window Carousel supported including the hardware based pre-buffering ofIP decodes for smoother playbackOperating SystemSupportWindows 7 64 bit / Server 2012PowerRequirementsMax current at +3.3V = 1.9AMax current at + 12V = 1.9AAverage power = 14WOperating Temperature 0 to 35 ºC ( 32 to 95ºF)Storage Temperature -20 to 70 ºC ( -4 to 158ºF)Relative Humidity 5% to 90% non-condensingWarranty 3 yearsWe are continuously developing the technology used within our product ranges delivering outstanding innovative solutions,therefore the specifications may change from time to time.