Datalogic Memor X3 Quick Start Manual

Also see for Memor X3: Troubleshooting User manual Quick start guide User manual Instructions

Contents

Datalogic Memor X3 Quick Start Manual Manual pdf 1 page image

Memor™ X3 Healthcare (HC) Single Slot DockQuick Start GuideOverviewThe Memor X3-HC single slot dock paired with a Memor X3-HC mobile computer builds a reading systemfor the collection, decoding and transmission of barcoded data.The communication between the mobile computer and host PC through the Memor X3-HC single slot dockmay occur also by using the standard ActiveSync® connection.Parts and FunctionsThe Memor X3 single slot dock is a serial communication adapter between the host computer and theMemor X3 mobile computer, and as such, no power supply is required to be connected to the dock forcommunications. Since the single slot dock also functions as a battery charger, a power supply is requiredfor battery recharging operations, both for the mobile computer and spare battery pack recharging. Thespare battery pack recharging slot is compatible with the following batteries:• 94ACC1367 DL-Memor Large Capacity Battery (3.7V at 2000mAh)• 94ACC1368 DL-Memor Standard Battery (3.7V at 1100mAh)• 94ACC0084 Memor X3 Large Capacity Li-Ion Battery (3.7V at 2300mAh)• 94ACC0083 Memor X3 Standard Battery (3.7V at 1430mAh).Charge the Mobile ComputerThe single slot dock provides power to the Memor X3-HC and allows the charging of the device’s mainbattery.To charge the mobile computer:Charge the Spare BatteryThe single slot dock can charge the PDA main battery and a spare battery simultaneously.To charge the spare battery:1. Insert the spare battery into the spare battery slot, contacts side first, and then snap it into place.Ensure the label side is facing outside. The dock’s spare battery charge LED illuminates red.2. When charging is complete, pull the battery out gently and lift the battery out of the slot.LED IndicatorsSpare BatteryCharger LEDMini USB PortSpare Battery SlotMobile Computer ContactsRS232 PortPower JackPower LED1. Slide the Memor X3-HC into the mobile computer slot. The chargingstatus is shown by the Memor X3-HC.2. When charging is complete, remove the Memor X3-HC from the slot.LED StatusPower OnSolid Green Dock is powered.Spare Battery ChargeSolid Red Spare Battery is charging*.*. During charging, the LED may turn off to indicate a temporary suspension of charging.Solid Green Charging complete.

/ 2

Related manuals for Datalogic Memor X3