USE AND FUNCTIONING5333.8.5 Ethernet SettingsWindows CE Ethernet CradleDatalogic Kyman™ can be connected to an Ethernet network by inserting it into theDatalogic Kyman™ Ethernet Multi Cradle.When correctly inserted into the Ethernet Multi Cradle, the Ethernet driver installedon the mobile computer will automatically run, and using the DHCP service, willdynamically assign the IP Address.1. From the Datalogic Kyman™ open Internet Explorer>Internet Options and checkuse LAN no autodial then OK.2. From the Datalogic Kyman™ > Explorer, enter the IP address or the PCname in the address bar. You may be required to enter your networkusername and password. The LAN connection will take place and you willbe able to see the PC shared folders and exchange files.If your network provides Internet Service and does not use a proxy server you candirectly access the Internet. Otherwise set the internet proxy parameters according toyour network settings.
