Datakom DKG-116 User Manual

Also see for DKG-116: User manual

Datakom DKG-116 User Manual Manual pdf 1 page image

DKG-116 User Manual V-03 (30.03.2011)DKG-116 MANUAL ANDREMOTE START UNITThe DKG-116 is a low costgasoline/diesel genset control unitdesigned to start and stop a genset bothmanually and remotely.The manual control is made using RUNand STOP pushbuttons on the frontpanel. The remote control is made viaREMOTE START input signal.When RUN button is pressed or a RemoteStart signal arrives, the engine will becranked up to 3 times. When it runs, thecrank relay will be immediately deactivatedand after Holdoff timer delay, faultchecking will be enabled. When the engineis running, if a fault condition is detectedthen the engine is shutdown immediatelyand the unit indicates the source of thefailure through related alarm led.If the Remote Start signal disappears orthe STOP button is pressed or the gensetwill immediately stop.The MENU button selects displayparameter scroll and allows programmode entry and lamp test functions.The total engine run hours is kept in atamper-proof non-erasable memory whichis not affected by power failures.Generator Volts: L1-N, L2-N, L3-NGenerator Volts: L1-L2, L2-L3, L3-L1Generator FrequencyBattery VoltageAuxiliary output (negative pulling).Magnetic pickup input.Both Manual and remote controlGenerator protectionBuilt in alarms and warningsRemote Start operation availableTrue RMS measurementsTamper-proof engine hours displayField adjustable parametersHigh current Fuel and Crank outputsOptional auxiliary outputOptional magnetic pickup inputDigital inputs: 4Survives cranking dropoutsSealed front panelStandard panel dimensions: 96x48mmPlug-in connection systemFEATURESOPTIONSMEASUREMENTSDESCRIPTION

/ 4

Related manuals for Datakom DKG-116